Chicago Building Violations You Should Avoid

Many homeowners are not sure whether to or not code their homes. States all over the world have come up with construction codes which help to establish standard homes. The codes are on the lookout for the safety, health, and welfare of the residents. Before you start using the house, an inspection company should check it to ensure that it has met the required code of construction.

The building codes are similar, but they might differ depending on the geography and climate of an area. Other than being an important part of every construction process, many homeowners are aware of all the codes, and they understand their importance. In this article, we will discuss Chicago building violations every homeowner should avoid.

Ducking Permits

If you are thinking of deliberately skipping the ducking licenses because you believe that they will save you on cost, you might be mistaken. Without the ducking permits, inspectors will not check your house to see if it is in line with all the standards. But did you know that the inspection is for the sake of your safety? Weighing the two, you better choose your safety and that of your family.

Improper Bathroom Venting

The exhaust from your bathroom should vent on the outside either through the roof or on the side. It must never vent in the attic. You can check this on your own and have it corrected before the inspectors come. Improper venting results in rotting of the roof framing and sheathing because of the warm moist air. In addition to that, it will lead to the growth of mildew and molds on the roof. All these are not good for the health of the people in that house.

Handrails Without Returns

Handrails which do not finish with a 90-degree turn violate the building codes. Why is the open rail dangerous? They can trap a purse strap or clothing resulting in serious accidents.

Misplaced Smoke Alarms

You should install smoke alarms in all the rooms of a building and outside the bedrooms in line with the building codes. The alarms should be interconnected so that if one goes on the rest will automatically join. In addition to that, connect the alarm system to a backup battery just in case the central power goes off.